GTR Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
572 Posts
Discussion Starter #1
Will be removing this from my R32 GTR soon.

Power FC D-jetro with Commander, MAP-sensors and harness.

Can take a photo of the ECU if needed and a film of it starting up.

£500

258345
 

·
Registered
Joined
·
572 Posts
Discussion Starter #3
More or less any weekend if someone is interested. I already have my replacement and I won't be using the car until May.
 

·
Registered
Joined
·
2 Posts
just wondering if this comes with a basemap? my current setup is stock rb26 with 2860's and full exhaust with evc6 boost controller. looking for a stand alone but no dynos in my area running with the covid and am pretty familiar with the apexi hand controller tuning. thanks I would cover postage to Canada.
 

·
Registered
Joined
·
572 Posts
Discussion Starter #6
It has a base map. Used to run 2860-5 and 1000cc injectors and hks cams.

2 areas have been adjusted since.
Idle and 2500 rpm idle (have an rb30/26 and needed idle values adjusted for inspection but the rest of the map was untouched as I was swapping it out anyway.

Rpm limit is set to 3000 which could be good to know.
 

·
Registered
Joined
·
572 Posts
Discussion Starter #7
Also have a apexi avcr boost controller that I will include. Not in the best condition as the screen previously been moulded inte a centre console. But it does the job.
 
1 - 7 of 7 Posts
Top