GTR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
279 Posts
I dont know where to get it. I could get this part in Germany maybe if i had it.

I have big Electronics shop like 10km from me. Got a lot transistors, resistances and so on there. They have everything.

I chip tune old Honda P06/p28/p30 ECU and also install and repair Hondata Kpro, i get a lot parts from them.

How it's called in English?

Also try to find radio repair shop or electronics repair shop near you. Somethimes they have stuff like this.

I have one like this from Honda ECU but with 789 at the end not like your 612.
 

·
Registered
Joined
·
160 Posts
The larger Zenner diode ZD4 looks like it could be for surge suppression, and the smaller diode ZD1 is for voltage regulation. If such a big diode fails like this then there is a very good chance that there is a fault in the wiring to the ECU somewhere, and I would check for this and rectify the fault before repairing and trying the ECU again. Give RS a look on the web.
HTH
 
1 - 4 of 4 Posts
Top