Sorry my mistake, I know I have to swap the valves :shy: . What I meant to say is can I just do a direct swap of the rubber hoses from one to the other instead of plumbing in all the extra tubing supplied in the kit?
No - do that and you'll get 0.5bar boost. Plumb it in correctly as it says in the instruction manual. I tapped into the 'twin turbo' pipe for a pressure source, but I believe you can use one of the hoses that comes off the back end of the plenum
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.