GTR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I have just bought a gtr 32 and the clutch is ready.
The car is a 1/6/94 and the master cylinder sits behind the arm and
pushes forwards towards the engine, so is this a later clutch like
my gtr 33.
I was told there is a pull type (early) and push is the later one.
Most clutches seem to be advertised 90-93 and 93 on.
 

·
Registered
Joined
·
1,341 Posts
sounds like a pull type. mines a 1990 and the cylinder sits at engine side and pushes lever towards back of car. (same as the r33 gts i had)
 

·
Registered
Joined
·
197 Posts
yours is a pull type
push type has the cylinder nearest the engine pushing backwards towards gearbox.the clutch arm pivots inside bell housing and pushes the clutch to release.
 

·
Registered
Joined
·
100 Posts
Is there a way to find out If it is a push or pull type without stripping, as mine is slipping every now and then so I need to get a new one soon
 

·
Registered
Joined
·
2,852 Posts
speak to scotty in hexham - he does the most amazing prices on exedy clutches (normal or aftermarket)

www.japanimportcar.co.uk

sorry for the plug but he does sell a fair few clutches... I got my twin plate Os giken for me 33gtst for £400quid... a shedload cheaper than magazines and other ppl were quoting me!
 
1 - 6 of 6 Posts
Top