GTR Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
385 Posts
Discussion Starter · #1 ·
Hi,

I have just purchased/rescued an R32 GTS Auto to build into a track car using GTST running gear (give my R33 GTR a well deserved break :chuckle:)

I have the RB20DET engine, wiring and gearbox but still need a lot of other parts to get the project going.
Below is a list of parts needed, standard or aftermarket is fine but not wanting to spend silly money as initially I want to get it up and running MOT'd etc and then decide exactly what I will be doing with it.

Needed-
Front mount intercooler and piping.
Exhaust (from turbo back).
Turbo (either RB25 modified turbo, or something good for around 350bhp).
Clutch and flywheel.
Any gaskets for the exhaust/turbo area.
Rear main oil crank seal.

Would like but not needed yet-
Coilovers.
Some nice cheap seats (is there such a thing?)
RB26 injector resistor pack

I would ideally like to do a deal with numerous items together so someone stripping a GTST would be perfect.

Thanks,
Edward.
 

·
Skyline Section Manager
Joined
·
11,878 Posts
I have a slave cylinder and GTR clutch flywheel assy.

PM me
 

·
Registered
Joined
·
385 Posts
Discussion Starter · #4 ·
Hi,

Thank you but I have just sourced a slave cylinder now, was just about to update.
I actually have the original clutch and flywheel from my 33 but it is a pull and as I am keeping the original RB20 gearbox for now I don't want to bother converting it to pull.
Is the one you have a push clutch?

Thanks,
Edward.
 

·
Registered
Joined
·
385 Posts
Discussion Starter · #5 ·
Updated list-

Needed-
Front mount intercooler and piping.
Exhaust (from turbo back).
Turbo (either RB25 modified turbo, or something good for around 350bhp).
Clutch and flywheel.
Any gaskets for the exhaust/turbo area.
Rear main oil crank seal.
Coilovers (or possibly a nice lowered suspension to last a few track days)
 

·
Registered
Joined
·
385 Posts
Discussion Starter · #7 ·
Still looking for parts, if anyone is stripping an R32 a bulk deal on a load of parts would be great?
 
1 - 7 of 7 Posts
Top