[SkylineNewbie]

Any one hit the limiter? took mine to 7500 today but it didn`t cut off, where is the limiter???

 

[JasonO]

Limiter should be at 7000rpm, it is on my R33GTS25T.

Best check you have the stock ECU fitted

 

[Matt_S]

I thought the std rev limiter was 7500 rpm.

The rev counter does over read slightly, so you may get a few more rpm out of it. Maybe give it a little bit more to see where it stops?

 

[jrpidgeon]

It's actually 7200 revs.

 

[JasonO]

Matt,

If I wasn't sure it limited at 7k rpm then I'd take your advice, but I'm sure. Very sure

The thing is, after 6800rpm it's all over so no point hitting the limiter hard anyway.

 

[SkylineNewbie]

Hmmm interesting as today it went to 7500rpm and didn`t cut out. I know it has an aftermarket chip in the ECU (As spotted by Rod Bell) but I wouldn`t have though it would alter the rev limit. My car is still pulling well easily up to the Redlineof 7000rpm and apparently standard GTS`t`s don`t do this. mine is a bit special!