GTR Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
Does anyone have good advice on my r33
I'm running stage 1 through a chipped bell engineering ecu and the car is running good
But what I have laying around is a top mount manifold,550cc Injectors And a performance downpipe
I'm running a standard maf and standard turbo
What's the easiest way to get the car running well with the 550 injectors
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #4 ·
Ok thanks for advice
I've done a 0-60 test this evening and found the results bad 8.9:mad:.
The car feels good
No misfiring and pulls ok
Starting compression test
First cylinder is 150.But if they are all ok whats next
I'm looking at the turbo myself
Surely it's not your ecu richard;)
 

·
Registered
Joined
·
46 Posts
Discussion Starter · #5 ·
I did put my turbo through he'll and back in the summer but seemed to survive
No strange noises
I've got a manual boost controller but boost only reaches 0.5
Vehicle Car Motor vehicle Hood Automotive design
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top