GTR Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
486 Posts
Discussion Starter · #1 ·
Evening all,

I'm trying to find out if the cam pulley cover on the R33 GTS-T is the same as can be found on the R34 GT-T?
I believe they are but need to confirm.

Here is a picture of mine...



If anyone can compare or help out in any way I'd be very grateful.

Thanks
 

·
Registered
Joined
·
264 Posts
If I am not mistaken, the bolt holes line up but the cover will not fit in 100% (some slight shape differ). At least that is what I understood from people who force fit in clear R33 GTS-T cam pulley cover into an ER34.
 

·
Registered
Joined
·
141 Posts
I have both cam covers and engines available to snap pictures of fitment via swapping them around. But they do differ by cosmetic differences. As well the obvious the 34 is plastic and 33 is metal.
 

·
Registered
Joined
·
141 Posts
they interchange just fine, didn't take any pictures but you're good to go. The depth of the intake cam gear is the same on both engines.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top