GTR Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter #1
bought a new screen from jdmautolink. installed it and all the data on the screen appears reversed! WTF. to explain more precisely, if you take a document and place it in front a mirror, the image reflected back on the mirror surface appears reversed. this is what is appearing on my new screen. any help would be appreciated.
 

·
Registered
Joined
·
3,111 Posts
Looks like display has 'flipped' rather than reversed. Got the wire feed correct?
 

·
Registered
Joined
·
3,111 Posts
If your wiring is correct suggests the unit has an internal cross over somewhere. Needs replacing.
 

·
Registered
Joined
·
3,111 Posts
No, as image is 'flipped' not rotated. If you rotated it 180 then it would be read backwards.
 

·
Registered
Joined
·
451 Posts
That's weird ... could you have swap a ribbon ? Toshiba or Sharp screen ?
Is it sorted ?
I didn't have that kind of issue with my new screen.
 

·
Registered
Joined
·
2 Posts
Hi, i'm having a very similar problem to yours.
Mine is flipped horizontally while yours is vertically.
I've tried everything i can think of but no result.
I read somewhere regarding LCD panels, it's not a hardware issue.
It's a software issue. So i was wondering how to go about to get into the software settings...
 

·
Registered
Joined
·
116 Posts
Discussion Starter #13
Hi, i'm having a very similar problem to yours.
Mine is flipped horizontally while yours is vertically.
I've tried everything i can think of but no result.
I read somewhere regarding LCD panels, it's not a hardware issue.
It's a software issue. So i was wondering how to go about to get into the software settings...

I was sent a new replacement unit. did not interfere with the software settings.
 
1 - 13 of 13 Posts
Top