GTR Forum banner
1 - 19 of 19 Posts

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #1 ·
I have a set of R34 GTR roller bearing turbos for sale.

Good clean working condition with actuators.

They are a good upgrade for R32/R33 turbos as they spool up faster due to the roller bearings and can take a bit more boost. They can run around 1.15/ 1.2 bar no probs comapared to the 1 bar on stick turbos

Have seen cars produce around 450-500bhp with these turbos :)

Im after £400 plus delivery for a set.


I also have 2 sets of R34 turbo elbows. Which offer massive improvements on flow compared to the stock elbows. They are stainless steel as standard.

£120 a set plus delivery.

I will put pics up tomorrow of these parts.
 

·
Registered
Joined
·
2,392 Posts
Hi Madden - i'm after more of your bits :p

Interested in the turbo's - pics of course ;)
Also - what actual condition are they in with sway and flutter? (ie up and down and in and out of the blades). And of course an estimate of the mileage they had done from the 34.

Cheers

Dave
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #4 ·
Few pics or the turbos and elbows.











And the elbows. You can see how the are alot more open then the r32/33 cast items. ;)






I set of elbows SOLD but still have another ;)

The turbos are in good condition.

No cracks in the exhaust housing around the wasegates.

As they are roller bearing turbos they have more play then normal turbos until they have oil run through them and a little noisier. They both have exactly the same amount of play up and down and in and out. The blades have no marking on them at all and no scars on the hosuings. :)

They have been sitting around for a year and they have coverered around 30-40000 miles. Just looking at the pics, it looks like has have been rebuilt as the rear shaft nuts are different :)
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #6 ·
Pmed back my man ;)
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #9 ·
That was quick. I only sent them yesturday :)

Have fun
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #10 ·
Turbos now sold but still have a set of elbows available :)
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #12 ·
Yep the elbows will fit any gtr turbos mate :)
 

·
Registered
Joined
·
3,498 Posts
Discussion Starter · #19 ·
Cheers guys

ALL SOLD
 
1 - 19 of 19 Posts
Top