GTR Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
525 Posts
Discussion Starter · #1 ·
Hi guys im selling my original R34 GTR turbos (60K approx), there is no shaft play and they seems to be in very good condition I had them inspected my Doug sport who deal with turbos based in Stourbridge West Midlands. These where replaced as I thought the seals were gone but it was the piston ring land that broke which caused the smoke and oil, which resulted in a engine rebuild. Im based in the Walsall collection would be preferred but will post out. Im looking for £400.

Piston failure thread
http://www.gtr.co.uk/forum/125995-what-your-opinion-smoking-issue-3.html

you get what you see in the pictures the gaskets and elbows came with my 2860-5 but were not used so will include in this sale they are in used condition.(one gasket missing, see picture)










The studs were all replace with new high tensile studs.



 

·
Registered
Joined
·
736 Posts
hrmmm might be interested...

those look like ceramic exhaust wheels correct?

are they ball bearing or journal?

and whats the max pressure these can safely run at?>
 

·
Registered
Joined
·
1,455 Posts
hrmmm might be interested...

those look like ceramic exhaust wheels correct?

are they ball bearing or journal?

and whats the max pressure these can safely run at?>
just for your info yes they are ball baring and they can handle 1.2 bar max preshure ive been told as they do have ceramic exhaust wheels
hope this helps
 

·
Registered
Joined
·
525 Posts
Discussion Starter · #8 ·
you get what you see in the pictures the gaskets and elbows came with my 2860-5 but were not used so will include in this sale they are in used condition.(one gasket missing, see picture)
i ment "oil drain flanges" not elbows sorry about that it was a late night
 
1 - 9 of 9 Posts
Top