GTR Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
752 Posts
Discussion Starter · #1 ·
Hi guys,
so I bought my rb26 supertech forged pistons set, and now have a chance to get a hold of an rb30 block that is supposedly lying in a patrol workshop.
So does anyone know if I can still use these supertech pistons on the rb30 block? will I have too little or too much compression?
 

·
Registered
Joined
·
4,586 Posts
Hi guys,
so I bought my rb26 supertech forged pistons set, and now have a chance to get a hold of an rb30 block that is supposedly lying in a patrol workshop.
So does anyone know if I can still use these supertech pistons on the rb30 block? will I have too little or too much compression?
Too much, in fact TDC will put the piston above the block line
 

·
Registered
Joined
·
4,586 Posts
damn... changing to rb26 rods help at all?
Lol! Just sell the pistons and get the right ones.

I have heard of people machining the piston tops down to suit.....but that sounds scary to me!
 
1 - 4 of 4 Posts
Top