GTR Forum banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
966 Posts
Discussion Starter · #1 · (Edited)
Hello,

Looking for brand new or used good condition RB26 Tomei Poncam Type B:s.

Or something similar ? nothing lower than 260 duration 9.15 lift tho !

Please offer what you've got thanks :)
 

·
Premium Member
Joined
·
2,862 Posts
I think if I remember correctly, we have an HKS 272 degree intake cam with around 10.5mm lift, I'd have to check the specs as I'm going from memory here. It was taken out of the Hipo when it had V-Cam installed and stored away....Matt probably has the specs.
 

·
Premium Member
Joined
·
966 Posts
Discussion Starter · #4 ·
Mm, looking for a pair. I think 272 / 10.5 will be a bit too radical for the street; low down torque loss might be a bit too much.

Thanks tho Miguel :)

Calibrat: many thanks for the info :)
 

·
Skyline Section Manager
Joined
·
11,878 Posts
I ran JUN 272 deg 10.5 lift and it ran very well. It would idle at 600rpm.
 

·
Premium Member
Joined
·
966 Posts
Discussion Starter · #6 ·
That sorta cams take out low end power don't they. Mainly driven on the street now.
 
1 - 7 of 7 Posts
Top