GTR Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
234 Posts
Discussion Starter #1
Heres a few pics of my rb30 lump after i gave it a bit of a birthday..... when i slapped it together the first time, it was only supposed to be in the car for a week or so till i finished ( FIND FUNDS TO FINISH) my monster rb30 i was building in oz..... but moved to uk so sold it.... brought car over to uk with slap together engine,,, bolted big hair dryer to it and got 500hp to the feet at 1.7 bar...... the poor old thing had more blow buy then a windmill and filled the oil catch can after every 1/4 mile run:apuke:

so i thought i would give it a good once over and take the time to put it together properly... ( instead of the 2 days it took me to find bits i had lying around the workshop and slap it together and get it in the car)

so i think it should make a big improvement on the power now the boost will stay in the pots instead of the crankcase......







 

·
Registered
Joined
·
50 Posts
very nice piece of kit. what intake manifold is it?? is it a full custom manifold or have you just cut up a standard gts manifold and relocated the throttle body to the end of it???
 

·
Registered
Joined
·
234 Posts
Discussion Starter #4
neil c said:
very nice piece of kit. what intake manifold is it?? is it a full custom manifold or have you just cut up a standard gts manifold and relocated the throttle body to the end of it???
rb20 plenum that i modded and opened up, with a 75mm falcon throttle body
 
1 - 5 of 5 Posts
Top