GTR Forum banner
1 - 1 of 1 Posts

53 Posts
Discussion Starter · #1 ·
Hi All,

I have had to work on my RB26 engine so i took it out of the car.
Work all done and not knowing about the pull clutch system :eek: I have refitted the engine with the pressure plate on the engine and the release bearing on the input shaft of the box. Was this the right thing to do as I have tried to get the bearing in the fingers but cant manage to do it. Also after lots of pushing the fork is now very floppy and I think it has come off the bearing if this is possible.

Does anyone have experiance of this or any info or pics of what I should do? :confused:
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.