GTR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,979 Posts
Discussion Starter · #1 ·
Im about to change the R33 GTR airbag wheel for a lovely Momo one which santa brought me.

Is the airbag held on by some screws or a pull off type fitment ?

Im assuming its a matter of disconnecting the battery , remove airbag, loosend main screw a bit and then wiggle the old wheel free ( keeping the wheels straight ).

What does the hicas module behind the wheel look like and is the airbags just a plug in type fitment.

Should be doing this tomorrow after the postie brings a new hicas and airbag boss kit...
 

·
Registered
Joined
·
4,145 Posts
I see Royal Snail still hasn't delivered the boss kit!!! And it was 1st class!!

More than likely it will be held on by alan screws or (maybe) torx. 2 more than likely

And then yeh remove airbag, disconnect airbag, open main steering wheel nut. Fit boos kit, and reverse order of removal!!!
 

·
Registered
Joined
·
1,979 Posts
Discussion Starter · #4 ·
Wheel

Yeah R33 V-spec but im sure it will be here tomorrow at some point.Im sure it will be self explanitary when i see the new boss kit.I think if i diconnect the battery and hit the brakes a few times it will fully drain the system enough to ensure idont run into airbag problems..And Thnks to the guys who PM`d me with full explanation..Cheers...
 
1 - 4 of 4 Posts
Top