[gijsje]

Hi
There are 2 wires and a plug on the stearing rack.
What does this do?
is this for the steering angle r is for something else?

Gijs

 

[gijsje]

i have looked at it agiain but it looks more like a valve
Any idea what this does?

 

[Mookistar]

i don't know for sure, but i know the R32 speedo and steering wheel position thingies are not to messed with unless you know what your doing

I'm sure a 32 owner will help out though

mook

 

[mambastu]

Hi
There are 2 wires and a plug on the stearing rack.
What does this do?
is this for the steering angle r is for something else?

Gijs

Definitely not for steering angle as thats actually done by a disc behind the steering wheel. I'll think you'll find that its the solenoid that controls the low speed/high speed power steering weighting.

 

[gijsje]

i already figured out after taking a close look and has to be a solenoid
Now the question would be do i need it, but i think i will just connect and when i make a custome loom and try it

 

[freakazoid3]

You can disconnect it if it's for a track car. It makes the steering a bit heavier to manoevre when driving slow or parking but not to heavy. I've disconnected mine aswell. It says in the manual that when unplugged it failsaves and gives the correct steering resistance for speeds between 30 km/h and 100 km/h

 

[Peter R32]

Isn't it the solenoid of the hicas?