GTR Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
888 Posts
Discussion Starter #1 (Edited)
Has anyone tried these? -
501 LED Extreme Power 1.5W 360 degree (white, blue, red or amber)

Or these? -
http://www.xenons4u.co.uk/led-bulbs/49-t10-w5w-501-led-canbus-high-power-5-smd-wedge-bulbs.html

Or these? -
http://www.powerbulbs.com/product/philips-xtreme-vision-led-w5w-t10-6000k

If you have, what's your thoughts & did they throw up a light failure warning?

i used something similar in my previous Impreza with no issues, but it wasn't a 360 degree bulb!

Also, will this W5W the same for the number plate?

Cheers
Iggy
 

·
Registered
Joined
·
888 Posts
Discussion Starter #3
I just bought the knight racer ones instead, no warnings with those ones!
Cheers for the reply :thumbsup:

Are they 'bright white' to match the Xenons?
I'll have a search, but do you have a link?

Oh & are they the same bulb for the side light & rear number plate? (W5W wedge LED, I think they are)!

Cheers
Iggy
 

·
Registered
Joined
·
888 Posts
Discussion Starter #5
Just saw on their www, 501 T10 CANBUS for the side light & C5W for the number plate!
I'll have to measure the number plate bulbs for either 39 or 42mm bulbs.

Thanks for that :thumbsup:
 

·
Registered
Joined
·
888 Posts
Discussion Starter #6
I fitted these today - T10 W5W 501 LED Canbus High Power 5 SMD Wedge Bulbs
They are a great match for the OE headlights, extreme bright white & i'm hoping they last well!

I also unplugged the rear numberplate bulb unit & it's the same w5w wedge bulb. But due to the OE plastic moulding, I need a short LED wedge bulb. So i'll be looking for one tonight!

Then it'll be either Phillips Silver Tech indicators, or Orange LEDs to replace the OE orange bulb indicators at the front:)
 

·
Registered
Joined
·
888 Posts
Discussion Starter #8
Were they easy to swap out? Realised I have a few of these bulbs in the garage not doing anything!
Much easier than my previous RB320!
Took me literally 1 minute for both, as you can access with the bonnet up & it's a simple 'twist' out the bulb holder & replace new LED unit:thumbsup:
 
1 - 9 of 9 Posts
Top