GTR Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,126 Posts
Discussion Starter #1
Does anyone actually know what the trigger button does on a HKS boost controller ?

I know it temporarily gives a higher boost setting but does it work the same as actually setting it on one of the 2 normal settings ,ie low and high ? :confused:
 

·
Registered
Joined
·
666 Posts
Paul,
The trig button gives a 'boost' to the current setting be it low or high.
E.g. splash set to +0.1, low set to 1.0 high set to 1.2.
If current setting is low then hitting trig will give 1.1
If current setting is high then hitting trig will give 1.3
You can program the unit so that high is 1.3 anyway etc.

If you do this then it is exactly the same as 1.2 + trig
Hope this helps
 

·
Registered
Joined
·
15 Posts
I have a button hooked up to splash on my gearnob.

On the plug with 4 wires 2 of them set it off.. not sure what the other 2 do?

I think they are the peach and somthing.. Try touching them togethor and it will set the mode off, easiest way.

Ben
 
1 - 3 of 3 Posts
Top