GTR Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
9,768 Posts
Discussion Starter · #1 ·
Just had my old crank measured up and it's in very good shape and all journals with in spec for std size bearings. £400

For me personally does not make a difference between this and the r33/34 crank and the flat drive as one is narrow one is wide but they still have the same clearance issues and would really need a crank collar for flat drive with better clearances or go for the spline drive gear kit.

Conrods £200
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top