GTR Forum banner
Status
Not open for further replies.
61 - 80 of 95 Posts
Amazing number all over. Do you know why there is so much drivetrain loss? I have the same issue when compared to others

its definitely not looseing 300 hp through the drivetrain that is for certain, and with a 165 mph terminal its definitely making 1375 crank hp imo.

my opinion of it is that the wheel power figure is more than the dyno suggests and the flywheel figure will be about right with a 165 mph terminal.


insanely quick car to hit 165 mph in a 1/4 mile :bowdown1:
 
well done francis ;-) told you can do it..

Glad we could of helped you along.

Now to officially get it you need to do it back to back ;-)


8.2 is there.

Yes fitting the KW helped however not quite set up imo with only a 1.33 Lol

Officially F mans car is the Uk Record holder
3x passes all 167mph :)

The 3.8l SVM build did it's job, look at the data he's pulling away from Hulk and R1 after 1/8th..

R1 166mph F-man 167mph Hulk 170mph

Ps on old tyres..we will have to make the Hulk and R1 work a little harder

pps 7's are in their , watch this space :)

KK
 
Am happy for him very nice guy - been wanting this for years.

btw the 1/8th is still faster on the JUN R1 5.42 only just.

but 167 is faster than 166 ;-) for sure.

you need to take the HULK out now , but dont forget new syvecs firmware and burn out has come out now this year (not tried on JUN R1 yet).

Good luck next year.
 
Not done for this year, as the jap fest is next wk :). Hope weather holds.

Syvecs is ok, but you still have to modify the 4wd unit as the Hulk did in February 2012.

Watch you tube vid..

The unit has to have zero preload, as well as ecu control...new tyres on he will hit 1.2 sec 60ft and be very very close to a 7sec

If not he we will give him a little tickle on the 3.8l :) and maybe some Qashqai power lol.

Kk
 
Not done for this year, as the jap fest is next wk :). Hope weather holds.

Syvecs is ok, but you still have to modify the 4wd unit as the Hulk did in February 2012.

Watch you tube vid..

The unit has to have zero preload, as well as ecu control...new tyres on he will hit 1.2 sec 60ft and be very very close to a 7sec

If not he we will give him a little tickle on the 3.8l :) and maybe some Qashqai power lol.

Kk
yes things have improved cant wait to try new features.
 
Fantastic machine and we could not be more please for Francis, Francis Junior and the team at SVM.

Well done all, the accountant and I have great admiration for your perseverance and deep pockets.

:bowdown1::bowdown1::bowdown1::wavey:
 
61 - 80 of 95 Posts
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top