GTR Forum banner
Status
Not open for further replies.

Svm frankenstein 1100r

24K views 94 replies 33 participants last post by  Kev@SVM 
#1 ·
Got the bug again....here begins the next project
OEM intake manifold ported including end tanks and 70mm throttle body's
SVM will carry on with the rest of spec....to be continued
 
#7 ·
What Memories :)
F-man Tests the SRR :)





He Is Back :clap::clap:
F-Mans Black R35 certainly gave a good foundation and test bed for the New
Project.

A completely New car to Francis and a new canvas SVM to work from.

Car Details
My 10
Gun Metal Metallic
Stock
Best Qrt (in this car) 11.2 sec (Old Car 9.30sec @ 163.07mph)


Project name
Frankenstein

Target 1100 bhp+ :) + Street and 1/4 mile improvements along the way.


The car




Frankenstein spec (No neck bolts lol)

3.8l Short Motor
SVM Specification CP Pistons (improved combustion)
Carillo Rods
Dynamic Balanced
SVM cylinder Heads
ATI crank Damper
Ported Matched Valley
SVM Cams and Springs

ETS 35/82 Turbo Kit

Modified Stock Inlet
65mm Billet Throttles

Ecutek Race Rom Phase 4 Ecu
4 Bar Map
SD Tune
Modified Sensors
SVM 1200lt Triple tank fuel System
Billet fuel rails
PTFE fuel lines
Custom Fuel reg
Custom Injectors..(yet to be decided)

SVM 102mm Exhaust System
SVM Gear Cir Clips

PPG 1st Gear
SVM GR6 Gear strengthening
Nismo Transmission Fluid
SVM 16 plate clutch pac
Willall Racing Clutch seals
Willall Racing Diff Brace
SVM Steel Dowled Clutch baskets

Spec at this Stage is constantly changing :)
SVM Will be Joining forces this Year with Several of our Friends Over Sea's
(What not all UK Manufactured I hear you cry)

Our Wings are spreading..More Info on these amalgamations ASAP

Progress so far :)

Engine /Gearbox Out and in Lots of pieces :)











All Stock (Not for Long) LOL









Empty Space :)




Much more news to follow as the Project unfolds.

A Big welcome to Francis :thumbsup:
Bring On Frankenstein :) :D:D
 
#8 · (Edited)
looks like an interesting project, are you going to change the colour of the car? to match the project name ;d
 
#17 ·
Update

Parts for this man :)







Nice Turbo waste gate :)




Breather System




keeping him cool our freinds from ETS have asked us to test out there new cooler :)




mmmmm loads of goodies LOl




Plenty to get on with..Engine is based on an SVM long motor..Head,Cams,block
A good base for Francis and his new Monster :)

Engine will be completed this week ..Update to follow the build .
kk
 
#37 ·
After a few shake downs F-man has been out testing the new Asnu fuel system.



Flex fuel sensor installed to allow to keep a eye on the Ethanol content.

Fuel pressure sensor to communicate with Ecu :) Francis has fuel protection trips.

More Testing and results to follow





KK
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top