[Goodfellah]

Hello !
I would like to ask you guys if you have any tip you can give me.
Im taking my RB26 apart soon to see what condition the engine is inside.
I have thaught about doing a 'engine wash' dunno the english word for it.

So what should i think about when im taking the engine apart ?

Best regards
//Varro

 

[kismetcapitan]

check the bores, the crankshaft pins, and the bearings, should be scratch-free. know what the torque settings are for each bolt (I personally don't know but there's a sequence you must follow when bolting on the head). Checking the pistons for pitting, the piston ring lands for cracking...that's all I can think of at the moment.

 

[Goodfellah]

Where can i get the torque settings for the bolts then ?
Thanx for your time.
//Varro

 

[SmigzyGTR]

http://www.r34gtt.net/r32gtrworkshopmanualeng.pdf

Should be in here

 

[Niklas]

workshop manual, should be the same for al RB26 engiens
Och den vet vi var den finns :chuckle:

 

[T.F.S.]

Skyline Rebuild Guide - Turbo-Nutters.co.uk: Forum

may help..

 

[Goodfellah]

workshop manual, should be the same for al RB26 engiens
Och den vet vi var den finns :chuckle:

:flame:


thanx guys. If you can think of something else please let me know.