GTR Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
688 Posts
Discussion Starter · #1 ·
Here's a bit of a random one, but I seem to remember reading somewhere once that the Volk Rays wheels had to use Rays valve stem's! Is this the case or will anything eles work?

Dose anybody know the diameter of the hole, or have a cutaway drawing of the rim section?

I'm trying to establish if my TPMS valve's will fit ok in my TE37's

Cheers,
Steve
 

·
Registered
Joined
·
230 Posts
The Rays valves are very well engineered items, they are available from a trader on here, co-ord sport.

I'm sure you could adapt something else to run on them, but honestly, the valves weren't that expensive.
 

·
Registered
Joined
·
2,165 Posts
Hey Steve,

How's it going buddy, all good I hope. My TE37 were fitted with standard ones as you can see below. I'm guessing it will be fine. :)

 

·
Registered
Joined
·
688 Posts
Discussion Starter · #5 ·
Hi Guys, sorry for some reason I didn't get any email notification of your posts, so I'm a bit late responding!

@Wouter I'm going for the Stack Lite system.

@Tom yes the TE37's are fitted with the 'stock' Rays valves right now and all is very well, but I intend fitting a TPMS so would need to replace the rays valves with the Stack valves as the sensors are mounted to the valves!
 
1 - 5 of 5 Posts
Top