GTR Forum banner

1 - 20 of 41 Posts

·
Registered
Joined
·
2,949 Posts
Discussion Starter #1
Here is a photo of the large single throttle body that will be used
on my car this year with a very special one off plenum:)

Keith

 

·
Registered
Joined
·
134 Posts
WARNING - be careful you don't fall in when your fitting it - you may never been seen again!!! :p

That something very special - please, please post some pic of the plenum
 

·
Registered
Joined
·
2,949 Posts
Discussion Starter #5
hitokiri said:
WARNING - be careful you don't fall in when your fitting it - you may never been seen again!!! :p

That something very special - please, please post some pic of the plenum
Hi hitokiri

The plenum is not 100% finished yet,but now with us having the throttle
body here Cord and the boys have nothing holding them back now:p

Keith

 

·
Following EJH#25
Joined
·
6,837 Posts
My, that is rather large.....

Can't wait to see the finished results Keith/RBM!

Hopefully this year, I'll be able to see the car in action and not just in photos (if work allows:( ).
 

·
Registered
Joined
·
2,110 Posts
Looks impressive, but is larger than 100mm really going to be necessary, keith? I know you post on Supraforums where there are plenty of examples of 3.0ltrs making well over 1000rwhp with a sub 100mm throttle body. Just a question.

Cya O!
 
1 - 20 of 41 Posts
Top