GTR Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
592 Posts
Discussion Starter · #1 ·
I have a set of OEM CBA wheels available for sale. The wheels have some kerb damage on the fronts and don't have any TPMS fitted. I've used them for track days over the last 7 years. They don't have cracks or welds and were balanced a couple of years ago. They are fitted with OEM Dunlops that are quite worn from track use - see pictures. The wheels are currently in Sutton Coldfield but could be brought down to Ware in Herts. Collection preferred - £800.
 

·
Registered
Joined
·
592 Posts
Discussion Starter · #2 ·
I have a set of OEM CBA wheels available for sale. The wheels have some kerb damage on the fronts and don't have any TPMS fitted. I've used them for track days over the last 7 years. They don't have cracks or welds and were balanced a couple of years ago. They are fitted with OEM Dunlops that are quite worn from track use - see pictures. The wheels are currently in Sutton Coldfield but could be brought down to Ware in Herts. Collection preferred - £800.
Wheel Automotive tire Tread Hubcap Automotive design
Wheel Automotive tire Tread Hubcap Automotive design
Wheel Automotive tire Tread Hubcap Automotive design
 

Attachments

·
Registered
Joined
·
592 Posts
Discussion Starter · #4 ·
I'm open to offers on the wheels. I also have the front and rear anti roll bars, the air boxes and a set of used OEM brake pads from a low mileage 2017 EBA car. They are advertised separately on this section
 

·
Registered
Joined
·
592 Posts
Discussion Starter · #5 ·
Does anyone need a set of CBA wheels. These were my track day set but I need to clear out the garage 🙂. £650 or offers considered. Collection from Ware or Sutton Coldfield.
 

·
Registered
Joined
·
592 Posts
Discussion Starter · #6 ·
I'm still looking to move these wheels to clear my garage. I've had offers around £400 but I'm looking for nearer £600. I can deliver if it's a short distance.
 

·
Registered
Joined
·
592 Posts
Discussion Starter · #9 ·
I think the biggest issue would be the cost because of the size and weight. It might be possible to to take the tyres off if you didn't need them but then I'd be worried the alloys might suffer damage in transit. There may also be duties for you now we've left the EU ?
 

·
Vendor
Joined
·
4,561 Posts
Try Shipley for quotes.

pop the tyres off if there not great and when you ship just make two 21” cardboard Circles per wheel to cover either side of the wheels and use a good bit of parcel tape or shrink wrap.
 
1 - 10 of 10 Posts
Top