GTR Forum banner

1 - 20 of 52 Posts

·
Registered
Joined
·
9,736 Posts
Discussion Starter #1
I have two of these diffusers for sale, you can add up to 4 additional vanes and has pre drilled holes. These are off my old FR aero kit, but did a dummy line up on my R32 and with some cutting should line up and fit an R32 or R33





£300 each.
 

·
Registered
Joined
·
230 Posts
I love that!! It'd be excellent to see what it looks like installed.
 

·
Registered
Joined
·
2,753 Posts
Why not advertise these on race cars direct? Cheap enough to make spares!
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #6
I have done so on Racecars but they are from an old aero kit and are not used in the UK and too expensive to ship overseas due to volumetric weight.

Just needs someone with some fabrication know how and they will fit. I will take measurements tonight and post them up.
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #7 (Edited)
Some pictures and dimensions:









Look at the picture below: You can easily add additional vanes as per picture the car the diffuser came off of.

 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #10
Someone must want a rear diffuser, not hard to adapt and is very very light in weight being dry carbon. These are 3k new.

Got one left and poss another if I don't decide to keep it for myself.
 

·
Registered
Joined
·
2,627 Posts
Trying to imagine how this would fit. Would it be difficult making the brackets? Have you tried test fitting? I notice some lines on the left, proposed cutting area?
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #12
The lines are just marks. But to fit you would need some L shaped brackets and mount on to the underside of the car. The diffuser would extend forward of the rear axle point and would need to do some trimming to clear the wheel but that's about it.. Just needs some basic skills really to fit. I placed it under the car just so get an idea and that's about it.
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #14
Only the vanes at the other end I think the main diffuser element will curl up under the fuel tank pretty well
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #17
Yeah it should do, you will need to do some trimming work and make brackets. This is a very light dry carbon diffuser.
 

·
Registered
Joined
·
9,736 Posts
Discussion Starter #20 (Edited)
Would have to arrange a courier but yeah should be possible I have two left at 300 and a almost new mint one for 400. The one in the picture sold a while back.
 
1 - 20 of 52 Posts
Top